No matter the water damage emergency, Gylling Family Construction LLC is on our way to respond to your property.
Forms of Water Damage
Water damage insurance claims depend on a few different criteria. Ultimately, that's a question you'll have to clarify with your insurance company. However, we can tell you that the viability of water damage insurance claims depends primarily on what caused the damage (storm, burst pipe, plumbing malfunction, localized flood, sump pump failure, etc.). Some insurance policies will outline scenarios that will NOT be covered without specific riders like flood insurance, or sump pump failure insurance.
Contacting a restoration contractor as well as your insurance adjuster at the same time is a good idea because the restoration contractor will help make sure that not only will the water extraction and dry out be covered but the rebuild process that should follow. If the full scope of the claim isn't outlined and agreed upon from the start, there may be issues down the line, and property owners may find themselves having to pay out of pocket to get the property completely back to normal.
That depends on the types of materials that were affected by water. Drywall, carpet, and hardwood floors will take longer to dry than other materials in the space. We use moisture meters throughout the process and in many different locations to gauge the moisture levels and will continue to adjust our fans and dehumidifiers to achieve an efficient but effective dry time. The bare minimum of "three days to dry" may only produce a surface dry, but can still leave behind moisture levels that create an ideal environment for mold to grow.
Most homeowners start trying to remove the water themselves before they realize they'll need to contact their insurance company about a claim so they can call in a water damage restoration company. However, standing water around anything with a power cord or outlet or sagging ceilings make the area unsafe. Also, many insurance claims require documentation of the loss BEFORE any work is done, including removing the water. Always take plenty of photos of the damage you see before taking any action to start cleaning up the mess. Your restoration contractor will be able to back up your insurance claim scope with the necessary technical documentation as well.
If the water damage involves Category 1 water (clean and free of microbes and bacteria), many of your personal belongings can be salvaged. Category 2 water would include other water sources, including rainwater, that, while not containing biohazards or sewage, still pose health risks and the potential for destructive microbial growth and mold. A water damage restoration technician will help you sort through the contents of the property to determine what can be safely dried, what can be restored by a textile/contents technician, and what can't be saved or salvaged. There are off-site facilities in the area that specialize in restoring water-damaged contents. Your restoration team will document all of the contents leaving the property for restoration or disposal for your records and also for reimbursement from your insurance company.
Identifying the source of the water damage is one of the first steps in both the insurance claim process and before beginning to dry out and repair the damaged areas. After all, if you replace a sagging, wet ceiling that was caused by a roof leak but doesn't fix the roof, too, the next rainstorm will start the cycle all over again. The buckling to your hardwood floor could be caused by a leaking pipe. We will pinpoint the exact cause of your water damage and make sure the source is repaired. We make sure your restoration job is done right the first time.
Leaving sink cabinet doors ajar allows warm air to circulate around the pipes to help keep them from freezing. Wrapping pipes near exterior walls will also help protect them from freezing.
Infrared heat lamps or space heaters can gently thaw frozen pipes if you notice frost accumulation. Be careful not to heat the pipes too aggressively, though, as that may cause them to burst as well. Remember never to leave a heat source unattended to avoid fires.
Pipes running along exterior walls, especially below ground level, are prone to freezing and bursting during cold weather.
Temperatures 20 degrees Fahrenheit or less, sustained for 3 days or more, are likely to cause frozen pipes. If the weather is also windy, any temperature below 32 degrees Fahrenheit can also create a frozen pipe situation.
Inexpensive styrofoam spigot covers go a long way to prevent the adjacent plumbing from freezing, as well as draining any water from those faucets after shutting off their water supply inside the building. Most homeowners forget this important step, only to have their basements or crawl spaces flood in the spring when they turn their outdoor faucets on for the first time after winter.
Check out our water extraction questions for more information on what to expect when water damage occurs in your home. Click Here to view our wate...
Check out our water damage restoration questions for more information on what to expect when you choose Gylling Family Construction LLC for water dam...
Check out our water damage repair questions for more information on what to expect when water damage occurs in your home. Click Here to view our w...